This is the latest recevied telemetry packets stored in our database for station/object SP2KFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794356676 | 140 Count | 524 Count | 126 Count | 4.07 VDC | 0 VDC |
| 1794354875 | 128 Count | 473 Count | 115 Count | 4.1 VDC | 0 VDC |
| 1794353074 | 115 Count | 423 Count | 103 Count | 4.05 VDC | 0 VDC |
| 1794351273 | 104 Count | 369 Count | 93 Count | 4.05 VDC | 0 VDC |
| 1794349481 | 87 Count | 318 Count | 81 Count | 4.09 VDC | 0 VDC |
| 1794347680 | 75 Count | 272 Count | 70 Count | 4.08 VDC | 0 VDC |
| 1794345880 | 60 Count | 227 Count | 56 Count | 4.1 VDC | 0 VDC |
| 1794344079 | 49 Count | 181 Count | 46 Count | 4.05 VDC | 0 VDC |
| 1794342278 | 35 Count | 137 Count | 33 Count | 4.1 VDC | 0 VDC |
| 1794340477 | 22 Count | 93 Count | 21 Count | 4.05 VDC | 0 VDC |
| 1794338676 | 10 Count | 45 Count | 10 Count | 4.1 VDC | 0 VDC |
| 1794336876 | 331 Count | 1045 Count | 305 Count | 4.04 VDC | 0 VDC |
| 1794335075 | 318 Count | 996 Count | 293 Count | 4.1 VDC | 0 VDC |
| 1794333274 | 311 Count | 969 Count | 287 Count | 4.05 VDC | 0 VDC |
| 1794331474 | 299 Count | 919 Count | 276 Count | 4.1 VDC | 0 VDC |
| 1794329673 | 287 Count | 868 Count | 265 Count | 4.07 VDC | 0 VDC |
| 1794327881 | 268 Count | 808 Count | 251 Count | 4.1 VDC | 0 VDC |
| 1794326080 | 242 Count | 721 Count | 226 Count | 4.06 VDC | 0 VDC |
| 1794324279 | 226 Count | 664 Count | 211 Count | 4.1 VDC | 0 VDC |
| 1794322478 | 213 Count | 610 Count | 199 Count | 4.05 VDC | 0 VDC |
| 1794320678 | 205 Count | 580 Count | 192 Count | 4.11 VDC | 0 VDC |
| 1794318877 | 192 Count | 530 Count | 180 Count | 4.05 VDC | 0 VDC |
| 1794317076 | 179 Count | 479 Count | 168 Count | 4.1 VDC | 0 VDC |
| 1794315275 | 166 Count | 432 Count | 156 Count | 4.06 VDC | 0 VDC |
| 1794313475 | 153 Count | 383 Count | 144 Count | 4.07 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)