This is the latest recevied telemetry packets stored in our database for station/object W6CWB-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1770464939 | 3.37 VDC | 22.4 C | 39.13 % | 1023.38 hPa | 0 |
| 1770456793 | 3.45 VDC | 23 C | 39.08 % | 1023.38 hPa | 0 |
| 1770447783 | 3.49 VDC | 23.6 C | 39.38 % | 1022 hPa | 0 |
| 1770438774 | 3.55 VDC | 24.1 C | 39.16 % | 1020.38 hPa | 0 |
| 1770429764 | 3.6 VDC | 24.6 C | 39.41 % | 1020.13 hPa | 0 |
| 1770406076 | 3.7 VDC | 22.7 C | 39.24 % | 1023.13 hPa | 0 |
| 1770397977 | 3.75 VDC | 22 C | 38.72 % | 1025.38 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)