PenangAPRS Track

My position About ☰

reset

F1ZDB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F1ZDB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V_Batt*	RX_rate*	RelRate*	DrpRate*
1790343137	4.3 VDC	140 pkt/h	68 pkt/h	72 pkt/h
1790342237	4.3 VDC	136 pkt/h	60 pkt/h	76 pkt/h
1790341337	4.29 VDC	112 pkt/h	52 pkt/h	60 pkt/h
1790340436	4.28 VDC	244 pkt/h	116 pkt/h	128 pkt/h
1790339536	4.29 VDC	300 pkt/h	96 pkt/h	204 pkt/h
1790338636	4.29 VDC	160 pkt/h	56 pkt/h	104 pkt/h
1790337736	4.29 VDC	148 pkt/h	60 pkt/h	88 pkt/h
1790336835	4.29 VDC	152 pkt/h	60 pkt/h	92 pkt/h
1790335935	4.29 VDC	140 pkt/h	68 pkt/h	72 pkt/h
1790335035	4.29 VDC	152 pkt/h	68 pkt/h	84 pkt/h
1790334135	4.28 VDC	156 pkt/h	72 pkt/h	84 pkt/h
1790333235	4.29 VDC	152 pkt/h	60 pkt/h	92 pkt/h
1790332334	4.3 VDC	168 pkt/h	80 pkt/h	88 pkt/h
1790331434	4.3 VDC	136 pkt/h	64 pkt/h	72 pkt/h
1790330534	4.3 VDC	163 pkt/h	88 pkt/h	76 pkt/h
1790328728	4.29 VDC	148 pkt/h	68 pkt/h	80 pkt/h
1790327827	4.3 VDC	187 pkt/h	80 pkt/h	108 pkt/h
1790326925	4.29 VDC	188 pkt/h	76 pkt/h	112 pkt/h
1790326024	4.3 VDC	172 pkt/h	68 pkt/h	104 pkt/h
1790325123	4.29 VDC	168 pkt/h	88 pkt/h	80 pkt/h
1790324223	4.29 VDC	212 pkt/h	96 pkt/h	116 pkt/h
1790323323	4.3 VDC	224 pkt/h	80 pkt/h	144 pkt/h
1790322423	4.29 VDC	128 pkt/h	64 pkt/h	64 pkt/h
1790321522	4.29 VDC	240 pkt/h	100 pkt/h	140 pkt/h
1790320622	4.29 VDC	172 pkt/h	56 pkt/h	116 pkt/h

*Used Equation Coefficients:

V_Batt: 0, 0.01, 0

RX_rate: 0, 1, 0

RelRate: 0, 1, 0

DrpRate: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)