PenangAPRS Track

My position About ☰

reset

OK4AB-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK4AB-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatu*	Humidity*	Pressure*	Satellite*
1780225250	28.69 C	49.17 %	972.2 hPa	12
1780224596	28.65 C	49.17 %	972.2 hPa	12
1780224587	28.65 C	49.16 %	972.2 hPa	12
1780223933	28.62 C	49.17 %	972.5 hPa	12
1780223282	28.61 C	49.18 %	972.8 hPa	12
1780222630	28.59 C	49.19 %	973 hPa	12
1780221979	28.55 C	49.32 %	973.1 hPa	12
1780221329	28.54 C	49.33 %	973.1 hPa	12
1780220668	28.54 C	49.27 %	973.2 hPa	12
1780220017	28.54 C	49.24 %	973.3 hPa	12
1780219371	28.53 C	49.31 %	973.4 hPa	12
1780219363	28.53 C	49.32 %	973.4 hPa	12
1780218815	28.52 C	49.18 %	973.4 hPa	12
1780218166	28.51 C	49.23 %	973.6 hPa	12
1780217516	28.5 C	49.17 %	973.7 hPa	12
1780216865	28.5 C	49.19 %	973.9 hPa	12
1780216214	28.51 C	49.12 %	974.1 hPa	12
1780215563	28.53 C	48.99 %	974.3 hPa	12
1780214912	28.57 C	48.82 %	974.5 hPa	12
1780214264	28.68 C	48.67 %	974.5 hPa	12
1780214204	28.7 C	48.61 %	974.5 hPa	12
1780214142	28.71 C	48.57 %	974.5 hPa	12
1780213903	28.78 C	48.53 %	974.5 hPa	12
1780213844	28.79 C	48.51 %	974.5 hPa	12
1780213561	28.88 C	48.38 %	974.6 hPa	12

*Used Equation Coefficients:

Temperatu: 0, 0.01, 0

Humidity: 0, 0.01, 0

Pressure: 0, 0.1, 800

Battery: 0, 0.01, 0

Satellite: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)