This is the latest recevied telemetry packets stored in our database for station/object SP8HDC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794359137 | 258 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794357336 | 257 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794355535 | 256 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794353735 | 255 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794351934 | 254 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794350133 | 253 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794348332 | 252 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794346532 | 251 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794344731 | 250 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794342930 | 249 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794341130 | 248 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794339329 | 247 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794337536 | 246 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794335735 | 245 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794333935 | 244 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794332134 | 243 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794330333 | 242 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794328533 | 241 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794326732 | 240 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794324931 | 239 Count | 260 Count | 101 Count | 0 VDC | 0 VDC |
| 1794323130 | 226 Count | 248 Count | 89 Count | 0 VDC | 0 VDC |
| 1794321330 | 223 Count | 246 Count | 87 Count | 0 VDC | 0 VDC |
| 1794319529 | 222 Count | 246 Count | 87 Count | 0 VDC | 0 VDC |
| 1794317728 | 221 Count | 246 Count | 87 Count | 0 VDC | 0 VDC |
| 1794315935 | 220 Count | 246 Count | 87 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)