This is the latest recevied telemetry packets stored in our database for station/object G1MEI-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1780196060 | 3.87 VDC | 19.8 | 37.99 | 1017.63 | 0 |
| 1780187034 | 3.98 VDC | 21.6 | 36.56 | 1018.13 | 0 |
| 1780178009 | 4.05 VDC | 23.5 | 35.7 | 1018.25 | 0 |
| 1780168983 | 4.09 VDC | 23.1 | 38.27 | 1018.63 | 0 |
| 1780166993 | 4.19 VDC | 18.5 | 45.79 | 1016.88 | 0 |
| 1780166671 | 4.19 VDC | 18.4 | 45.72 | 1016.88 | 0 |
| 1780155342 | 3.92 VDC | 23 | 38.27 | 1017.38 | 0 |
| 1780155077 | 3.9 VDC | 24.8 | 39.52 | 1017 | 0 |
| 1780153873 | 3.91 VDC | 21 | 41.25 | 1020.13 | 0 |
| 1780153140 | 3.86 VDC | 21.3 | 39.87 | 1018.63 | 0 |
| 1780152637 | 3.83 VDC | 21.4 | 39.82 | 1016.88 | 0 |
| 1780152398 | 3.82 VDC | 21.9 | 38.94 | 1018.25 | 0 |
| 1780151945 | 3.81 VDC | 21.2 | 39.99 | 1019 | 0 |
| 1780151041 | 3.77 VDC | 21.3 | 39.66 | 1018 | 0 |
| 1780150758 | 3.76 VDC | 21.6 | 39.71 | 1017.88 | 0 |
| 1780150476 | 3.75 VDC | 22 | 38.84 | 1015 | 0 |
| 1780149805 | 3.71 VDC | 21.9 | 39.27 | 1017.63 | 0 |
| 1780147712 | 3.6 VDC | 25.2 | 33.34 | 1018.38 | 0 |
| 1780145467 | 3.43 VDC | 28.6 | 33.66 | 1020 | 0 |
| 1780142946 | 3.55 VDC | 25.2 | 38.02 | 1018.13 | 0 |
| 1780141592 | 3.5 VDC | 27.1 | 34.23 | 1017.38 | 0 |
| 1780141326 | 3.46 VDC | 27.1 | 32.32 | 1018.75 | 0 |
| 1780130014 | 3.25 VDC | 17.3 | 50.39 | 1021.5 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)