This is the latest recevied telemetry packets stored in our database for station/object 9W2GEE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765136119 | 3.41 VDC | 0 | 0 | 0 | 0 |
| 1765135219 | 3.42 VDC | 0 | 0 | 0 | 0 |
| 1765134318 | 3.45 VDC | 0 | 0 | 0 | 0 |
| 1765133418 | 3.46 VDC | 0 | 0 | 0 | 0 |
| 1765132517 | 3.51 VDC | 0 | 0 | 0 | 0 |
| 1765131617 | 3.55 VDC | 0 | 0 | 0 | 0 |
| 1765130716 | 3.58 VDC | 0 | 0 | 0 | 0 |
| 1765129816 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1765128893 | 3.64 VDC | 0 | 0 | 0 | 0 |
| 1765127992 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1765127092 | 3.63 VDC | 0 | 0 | 0 | 0 |
| 1765125291 | 3.67 VDC | 0 | 0 | 0 | 0 |
| 1765123490 | 3.57 VDC | 0 | 0 | 0 | 0 |
| 1765120789 | 3.75 VDC | 0 | 0 | 0 | 0 |
| 1765119888 | 3.74 VDC | 0 | 0 | 0 | 0 |
| 1765118988 | 3.79 VDC | 0 | 0 | 0 | 0 |
| 1765117185 | 3.87 VDC | 0 | 0 | 0 | 0 |
| 1765116284 | 3.9 VDC | 0 | 0 | 0 | 0 |
| 1765114484 | 3.92 VDC | 0 | 0 | 0 | 0 |
| 1765113583 | 3.91 VDC | 0 | 0 | 0 | 0 |
| 1765111780 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1765110880 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1765109978 | 4.12 VDC | 0 | 0 | 0 | 0 |
| 1765109078 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1765107277 | 4.15 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)