This is the latest recevied telemetry packets stored in our database for station/object SP2GK-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769833532 | 540 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769831731 | 539 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769829930 | 538 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769826327 | 536 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769824526 | 535 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769822736 | 534 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769820935 | 533 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769819134 | 532 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769815533 | 530 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769813732 | 529 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769811931 | 528 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769810130 | 527 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769808329 | 526 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769804727 | 524 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769802926 | 523 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769801135 | 522 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769799334 | 521 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769797533 | 520 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769783126 | 512 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769781325 | 511 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769779534 | 510 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769777732 | 509 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769775932 | 508 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769772330 | 506 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769770529 | 505 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)