This is the latest recevied telemetry packets stored in our database for station/object CT7BAF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780137836 | 343 Count | 0 Count | 0 Count | 3.99 VDC | 0.14 VDC |
| 1780136034 | 342 Count | 0 Count | 0 Count | 4.02 VDC | 0.14 VDC |
| 1780134231 | 341 Count | 0 Count | 0 Count | 4.03 VDC | 0.14 VDC |
| 1780132428 | 340 Count | 0 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1780130625 | 339 Count | 0 Count | 0 Count | 3.99 VDC | 0.14 VDC |
| 1780128822 | 338 Count | 0 Count | 0 Count | 3.99 VDC | 0.14 VDC |
| 1780127019 | 337 Count | 0 Count | 0 Count | 3.99 VDC | 0.14 VDC |
| 1780125216 | 336 Count | 0 Count | 0 Count | 4.04 VDC | 0.14 VDC |
| 1780123413 | 335 Count | 0 Count | 0 Count | 4.05 VDC | 0.14 VDC |
| 1780121610 | 334 Count | 0 Count | 0 Count | 3.98 VDC | 0.14 VDC |
| 1780119807 | 333 Count | 0 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1780118004 | 332 Count | 0 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1780116236 | 331 Count | 0 Count | 0 Count | 3.99 VDC | 0.14 VDC |
| 1780114433 | 330 Count | 0 Count | 0 Count | 3.98 VDC | 0.14 VDC |
| 1780112631 | 329 Count | 0 Count | 0 Count | 3.99 VDC | 0.14 VDC |
| 1780110828 | 328 Count | 0 Count | 0 Count | 4.03 VDC | 0.14 VDC |
| 1780109025 | 327 Count | 0 Count | 0 Count | 3.98 VDC | 0.14 VDC |
| 1780107222 | 326 Count | 0 Count | 0 Count | 4.02 VDC | 0.14 VDC |
| 1780105419 | 325 Count | 0 Count | 0 Count | 4 VDC | 0.14 VDC |
| 1780103616 | 324 Count | 0 Count | 0 Count | 4.03 VDC | 0.14 VDC |
| 1780101813 | 323 Count | 0 Count | 0 Count | 4.02 VDC | 0.14 VDC |
| 1780100010 | 322 Count | 0 Count | 0 Count | 3.99 VDC | 0.14 VDC |
| 1780098207 | 321 Count | 0 Count | 0 Count | 3.98 VDC | 0.14 VDC |
| 1780096404 | 320 Count | 0 Count | 0 Count | 4.01 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)