This is the latest recevied telemetry packets stored in our database for station/object KF6YGK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786404637 | 418 | 645 | 0 | 0 | 0 |
| 1786402832 | 418 | 646 | 0 | 0 | 0 |
| 1786397417 | 419 | 645 | 0 | 0 | 0 |
| 1786390198 | 420 | 644 | 0 | 0 | 0 |
| 1786388393 | 421 | 643 | 0 | 0 | 0 |
| 1786377573 | 421 | 627 | 0 | 0 | 0 |
| 1786375771 | 420 | 625 | 0 | 0 | 0 |
| 1786368564 | 421 | 621 | 0 | 0 | 0 |
| 1786364960 | 421 | 623 | 0 | 0 | 0 |
| 1786359554 | 422 | 624 | 0 | 0 | 0 |
| 1786357752 | 423 | 626 | 0 | 0 | 0 |
| 1786354147 | 424 | 626 | 0 | 0 | 0 |
| 1786352345 | 424 | 629 | 0 | 0 | 0 |
| 1786350542 | 427 | 628 | 0 | 0 | 0 |
| 1786348740 | 481 | 631 | 0 | 0 | 0 |
| 1786346937 | 471 | 631 | 0 | 0 | 0 |
| 1786345134 | 443 | 630 | 0 | 0 | 0 |
| 1786343332 | 438 | 631 | 0 | 0 | 0 |
| 1786341528 | 436 | 632 | 0 | 0 | 0 |
| 1786339725 | 443 | 633 | 0 | 0 | 0 |
| 1786334316 | 435 | 636 | 0 | 0 | 0 |
| 1786332511 | 431 | 638 | 0 | 0 | 0 |
| 1786328903 | 417 | 643 | 0 | 0 | 0 |
| 1786323489 | 418 | 650 | 0 | 0 | 0 |
| 1786321683 | 419 | 650 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)