This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764963940 | 0 Count | 890 Count | 0 Count | 0 VDC | 0 VDC |
| 1764962740 | 0 Count | 890 Count | 0 Count | 0 VDC | 0 VDC |
| 1764961539 | 0 Count | 890 Count | 0 Count | 0 VDC | 0 VDC |
| 1764960339 | 0 Count | 890 Count | 0 Count | 0 VDC | 0 VDC |
| 1764960324 | 0 Count | 890 Count | 0 Count | 0 VDC | 0 VDC |
| 1764960231 | 0 Count | 890 Count | 0 Count | 0 VDC | 0 VDC |
| 1764959031 | 0 Count | 890 Count | 0 Count | 0 VDC | 0 VDC |
| 1764957831 | 0 Count | 890 Count | 0 Count | 0 VDC | 0 VDC |
| 1764956631 | 0 Count | 883 Count | 0 Count | 0 VDC | 0 VDC |
| 1764955431 | 0 Count | 883 Count | 0 Count | 0 VDC | 0 VDC |
| 1764954231 | 0 Count | 883 Count | 0 Count | 0 VDC | 0 VDC |
| 1764953031 | 0 Count | 883 Count | 0 Count | 0 VDC | 0 VDC |
| 1764951828 | 0 Count | 883 Count | 0 Count | 0 VDC | 0 VDC |
| 1764950628 | 0 Count | 861 Count | 0 Count | 0 VDC | 0 VDC |
| 1764949428 | 0 Count | 848 Count | 0 Count | 0 VDC | 0 VDC |
| 1764948228 | 0 Count | 848 Count | 0 Count | 0 VDC | 0 VDC |
| 1764947028 | 0 Count | 848 Count | 0 Count | 0 VDC | 0 VDC |
| 1764945828 | 0 Count | 848 Count | 0 Count | 0 VDC | 0 VDC |
| 1764944628 | 0 Count | 848 Count | 0 Count | 0 VDC | 0 VDC |
| 1764943427 | 0 Count | 847 Count | 0 Count | 0 VDC | 0 VDC |
| 1764942227 | 0 Count | 842 Count | 0 Count | 0 VDC | 0 VDC |
| 1764941027 | 0 Count | 841 Count | 0 Count | 0 VDC | 0 VDC |
| 1764939827 | 0 Count | 841 Count | 0 Count | 0 VDC | 0 VDC |
| 1764938627 | 0 Count | 839 Count | 0 Count | 0 VDC | 0 VDC |
| 1764937427 | 0 Count | 839 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)