This is the latest recevied telemetry packets stored in our database for station/object YO8RXW-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780150949 | 2.98 VDC | 0 | 0 | 0 | 0 |
| 1780150349 | 3.1 VDC | 0 | 0 | 0 | 0 |
| 1780149749 | 3.19 VDC | 0 | 0 | 0 | 0 |
| 1780149149 | 3.25 VDC | 0 | 0 | 0 | 0 |
| 1780148548 | 3.3 VDC | 0 | 0 | 0 | 0 |
| 1780147947 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1780147347 | 3.37 VDC | 0 | 0 | 0 | 0 |
| 1780146746 | 3.38 VDC | 0 | 0 | 0 | 0 |
| 1780146146 | 3.39 VDC | 0 | 0 | 0 | 0 |
| 1780145545 | 3.39 VDC | 0 | 0 | 0 | 0 |
| 1780144345 | 3.41 VDC | 0 | 0 | 0 | 0 |
| 1780143744 | 3.41 VDC | 0 | 0 | 0 | 0 |
| 1780143144 | 3.42 VDC | 0 | 0 | 0 | 0 |
| 1780142544 | 3.42 VDC | 0 | 0 | 0 | 0 |
| 1780141943 | 3.43 VDC | 0 | 0 | 0 | 0 |
| 1780141343 | 3.43 VDC | 0 | 0 | 0 | 0 |
| 1780140743 | 3.44 VDC | 0 | 0 | 0 | 0 |
| 1780140142 | 3.46 VDC | 0 | 0 | 0 | 0 |
| 1780139542 | 3.47 VDC | 0 | 0 | 0 | 0 |
| 1780138939 | 3.48 VDC | 0 | 0 | 0 | 0 |
| 1780138926 | 3.48 VDC | 0 | 0 | 0 | 0 |
| 1780138026 | 3.54 VDC | 0 | 0 | 0 | 0 |
| 1780137953 | 3.73 VDC | 0 | 0 | 0 | 0 |
| 1780137922 | 3.72 VDC | 0 | 0 | 0 | 0 |
| 1780137896 | 3.72 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)