This is the latest recevied telemetry packets stored in our database for station/object SA3MHZ-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780157933 | 31.6 C | 26.34 % | 0 | 0 | 0 |
| 1780157458 | 31.1 C | 26.27 % | 0 | 0 | 0 |
| 1780157045 | 30.6 C | 25.79 % | 0 | 0 | 0 |
| 1780156529 | 31.6 C | 25.85 % | 0 | 0 | 0 |
| 1780156152 | 31.9 C | 26.01 % | 0 | 0 | 0 |
| 1780155771 | 31.9 C | 26.06 % | 0 | 0 | 0 |
| 1780155162 | 32 C | 25.97 % | 0 | 0 | 0 |
| 1780154776 | 32.6 C | 26.7 % | 0 | 0 | 0 |
| 1780154290 | 32.9 C | 28.22 % | 0 | 0 | 0 |
| 1780153863 | 32.2 C | 29.9 % | 0 | 0 | 0 |
| 1780153489 | 31.4 C | 33.47 % | 0 | 0 | 0 |
| 1780153099 | 30.6 C | 34.12 % | 0 | 0 | 0 |
| 1780150585 | 31.5 C | 32.71 % | 0 | 0 | 0 |
| 1780150169 | 31.6 C | 32.62 % | 0 | 0 | 0 |
| 1780149779 | 31.9 C | 33.05 % | 0 | 0 | 0 |
| 1780149279 | 31.7 C | 33.59 % | 0 | 0 | 0 |
| 1780148905 | 31.5 C | 33.82 % | 0 | 0 | 0 |
| 1780148409 | 31.2 C | 33.66 % | 0 | 0 | 0 |
| 1780146299 | 33.2 C | 27.23 % | 0 | 0 | 0 |
| 1780145400 | 33.8 C | 27.14 % | 0 | 0 | 0 |
| 1780144551 | 33 C | 30.25 % | 0 | 0 | 0 |
| 1780144170 | 32.4 C | 31.68 % | 0 | 0 | 0 |
| 1780143798 | 31.5 C | 33 % | 0 | 0 | 0 |
| 1780143398 | 30.4 C | 34.82 % | 0 | 0 | 0 |
| 1780143025 | 29.4 C | 35.47 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)