PenangAPRS Track

My position About ☰

reset

F4GCF-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F4GCF-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	V_Batt*	RX_rate*	RelRate*	DrpRate*
1794328155	4.19 VDC	96 pkt/h	48 pkt/h	48 pkt/h
1794326954	4.2 VDC	99 pkt/h	54 pkt/h	45 pkt/h
1794325754	4.19 VDC	93 pkt/h	45 pkt/h	48 pkt/h
1794324554	4.19 VDC	99 pkt/h	39 pkt/h	60 pkt/h
1794323354	4.19 VDC	120 pkt/h	60 pkt/h	60 pkt/h
1794322153	4.18 VDC	129 pkt/h	54 pkt/h	75 pkt/h
1794320953	4.19 VDC	129 pkt/h	63 pkt/h	66 pkt/h
1794319753	4.19 VDC	135 pkt/h	69 pkt/h	66 pkt/h
1794318553	4.19 VDC	102 pkt/h	54 pkt/h	48 pkt/h
1794317353	4.19 VDC	96 pkt/h	45 pkt/h	51 pkt/h
1794314932	4.19 VDC	93 pkt/h	45 pkt/h	48 pkt/h
1794313732	4.2 VDC	87 pkt/h	36 pkt/h	51 pkt/h
1794312532	4.2 VDC	102 pkt/h	48 pkt/h	54 pkt/h
1794311332	4.18 VDC	96 pkt/h	27 pkt/h	69 pkt/h
1794310132	4.2 VDC	60 pkt/h	30 pkt/h	30 pkt/h
1794308931	4.19 VDC	117 pkt/h	63 pkt/h	54 pkt/h
1794307731	4.19 VDC	90 pkt/h	45 pkt/h	45 pkt/h
1794306531	4.19 VDC	75 pkt/h	33 pkt/h	42 pkt/h
1794305330	4.19 VDC	108 pkt/h	51 pkt/h	57 pkt/h
1794302929	4.19 VDC	81 pkt/h	27 pkt/h	54 pkt/h
1794301729	4.19 VDC	93 pkt/h	45 pkt/h	48 pkt/h
1794300529	4.19 VDC	81 pkt/h	42 pkt/h	39 pkt/h
1794299329	4.18 VDC	105 pkt/h	48 pkt/h	57 pkt/h
1794298129	4.19 VDC	102 pkt/h	48 pkt/h	54 pkt/h
1794296928	4.18 VDC	90 pkt/h	42 pkt/h	48 pkt/h

*Used Equation Coefficients:

V_Batt: 0, 0.01, 0

RX_rate: 0, 1, 0

RelRate: 0, 1, 0

DrpRate: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)