PenangAPRS Track

My position About ☰

reset

HS9BZG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS9BZG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*
1780184897	33.59 °C	50.6 %RH	990 hPa	4.16 V
1780184297	33.49 °C	50.7 %RH	990 hPa	4.16 V
1780183697	33.34 °C	50.8 %RH	989.8 hPa	4.16 V
1780183098	33.15 °C	50.9 %RH	989.7 hPa	4.16 V
1780182497	33.05 °C	51 %RH	989.6 hPa	4.16 V
1780181897	32.98 °C	51 %RH	989.5 hPa	4.16 V
1780181297	32.95 °C	50.9 %RH	989.3 hPa	4.16 V
1780180697	32.98 °C	50.8 %RH	989.2 hPa	4.17 V
1780180097	33.05 °C	50.7 %RH	989.2 hPa	4.16 V
1780179497	33.11 °C	50.5 %RH	989.2 hPa	4.16 V
1780178897	33.18 °C	50.4 %RH	989.1 hPa	4.16 V
1780178297	33.26 °C	50.3 %RH	989.1 hPa	4.16 V
1780177697	33.3 °C	50.2 %RH	989.1 hPa	4.16 V
1780177097	33.34 °C	50.2 %RH	989.1 hPa	4.16 V
1780176497	33.15 °C	50.4 %RH	989.1 hPa	4.16 V
1780175897	32.74 °C	50.5 %RH	989.1 hPa	4.09 V
1780175297	33.16 °C	50 %RH	989.1 hPa	4.12 V
1780174697	33.2 °C	49.9 %RH	989.1 hPa	4.16 V
1780174097	33.21 °C	49.8 %RH	989 hPa	4.16 V
1780173497	33.23 °C	49.7 %RH	989 hPa	4.16 V
1780172897	33.22 °C	49.6 %RH	989 hPa	4.16 V
1780172297	33.26 °C	49.5 %RH	989 hPa	4.16 V
1780171697	33.26 °C	49.4 %RH	989 hPa	4.16 V
1780171097	33.32 °C	49.3 %RH	989.1 hPa	4.16 V
1780170497	33.34 °C	49.2 %RH	989.2 hPa	4.16 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)