This is the latest recevied telemetry packets stored in our database for station/object F6ZCC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735143080 | 12.54 VDC | 0 | 0 | 0 | 0 |
| 1735142180 | 12.62 VDC | 0 | 0 | 0 | 0 |
| 1735141280 | 12.68 VDC | 0 | 0 | 0 | 0 |
| 1735140380 | 12.7 VDC | 0 | 0 | 0 | 0 |
| 1735139480 | 12.74 VDC | 0 | 0 | 0 | 0 |
| 1735138580 | 12.78 VDC | 0 | 0 | 0 | 0 |
| 1735137680 | 12.8 VDC | 0 | 0 | 0 | 0 |
| 1735136780 | 12.84 VDC | 0 | 0 | 0 | 0 |
| 1735135880 | 12.8 VDC | 0 | 0 | 0 | 0 |
| 1735134980 | 12.72 VDC | 0 | 0 | 0 | 0 |
| 1735134080 | 12.66 VDC | 0 | 0 | 0 | 0 |
| 1735133180 | 12.54 VDC | 0 | 0 | 0 | 0 |
| 1735132280 | 12.42 VDC | 0 | 0 | 0 | 0 |
| 1735131380 | 12.4 VDC | 0 | 0 | 0 | 0 |
| 1735130480 | 12.32 VDC | 0 | 0 | 0 | 0 |
| 1735129580 | 12.26 VDC | 0 | 0 | 0 | 0 |
| 1735128680 | 12.24 VDC | 0 | 0 | 0 | 0 |
| 1735127780 | 12.28 VDC | 0 | 0 | 0 | 0 |
| 1735126880 | 12.3 VDC | 0 | 0 | 0 | 0 |
| 1735125979 | 12.26 VDC | 0 | 0 | 0 | 0 |
| 1735117879 | 12.2 VDC | 0 | 0 | 0 | 0 |
| 1735116979 | 12.18 VDC | 0 | 0 | 0 | 0 |
| 1735116079 | 12.18 VDC | 0 | 0 | 0 | 0 |
| 1735115179 | 12.18 VDC | 0 | 0 | 0 | 0 |
| 1735114279 | 12.2 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)