This is the latest recevied telemetry packets stored in our database for station/object EA5KAO-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1769763883 | 3.03 VDC | 20.8 C | 47.83 % | 1016.38 hPa | 0 |
| 1769763372 | 3.33 VDC | 20.8 C | 47.8 % | 1013.88 hPa | 0 |
| 1769763309 | 3.35 VDC | 20.8 C | 47.75 % | 1014.38 hPa | 0 |
| 1769762892 | 3.45 VDC | 20.8 C | 47.36 % | 1014.75 hPa | 0 |
| 1769761003 | 3.68 VDC | 20.7 C | 47.39 % | 1009.88 hPa | 0 |
| 1769757391 | 3.75 VDC | 20.6 C | 47.04 % | 1013.13 hPa | 0 |
| 1769756488 | 3.76 VDC | 20.6 C | 46.81 % | 1012.38 hPa | 0 |
| 1769752876 | 3.81 VDC | 20.4 C | 44.6 % | 1016 hPa | 0 |
| 1769747464 | 3.87 VDC | 20.9 C | 46.23 % | 1010.13 hPa | 0 |
| 1769746561 | 3.87 VDC | 21.3 C | 46.59 % | 1010.25 hPa | 0 |
| 1769745652 | 3.88 VDC | 21.4 C | 47.28 % | 1013.38 hPa | 0 |
| 1769744749 | 3.89 VDC | 21.4 C | 47.42 % | 1014.63 hPa | 0 |
| 1769743846 | 3.9 VDC | 21.4 C | 47.62 % | 1011.38 hPa | 0 |
| 1769742943 | 3.91 VDC | 21.4 C | 47.44 % | 1007.63 hPa | 0 |
| 1769742731 | 3.91 VDC | 21.4 C | 47.33 % | 1010.5 hPa | 0 |
| 1769740747 | 3.93 VDC | 21.4 C | 47.34 % | 1006 hPa | 0 |
| 1769738366 | 3.95 VDC | 21.5 C | 47.5 % | 1006.5 hPa | 0 |
| 1769738251 | 3.95 VDC | 21.5 C | 47.51 % | 1006.5 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)