This is the latest recevied telemetry packets stored in our database for station/object DL6DCA-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1780163970 | 4.05 VDC | 31.3 C | 29.19 % | 1019.5 hPa | 0 |
| 1780159539 | 4.17 VDC | 34.4 C | 26.36 % | 1018.38 hPa | 0 |
| 1780149783 | 4.13 VDC | 33.1 C | 26.01 % | 1018.5 hPa | 0 |
| 1780149384 | 4.13 VDC | 33.7 C | 24.75 % | 1019.38 hPa | 0 |
| 1780148723 | 4.14 VDC | 33.7 C | 24.82 % | 1017.88 hPa | 0 |
| 1780143647 | 4.14 VDC | 31.9 C | 26.25 % | 1021.38 hPa | 0 |
| 1780143381 | 4.15 VDC | 32.4 C | 26.24 % | 1021.25 hPa | 0 |
| 1780142719 | 4.17 VDC | 33.6 C | 25.03 % | 1019.88 hPa | 0 |
| 1780141916 | 4.17 VDC | 32.5 C | 26.13 % | 1020.25 hPa | 0 |
| 1780141513 | 4.17 VDC | 32.5 C | 26.78 % | 1019.63 hPa | 0 |
| 1780131754 | 4.09 VDC | 38.3 C | 21.92 % | 1021.63 hPa | 0 |
| 1780130865 | 4.06 VDC | 38.1 C | 22.8 % | 1022.25 hPa | 0 |
| 1780129153 | 3.98 VDC | 37.7 C | 24.74 % | 1024.38 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)