This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1789959367 | 116 Count | 838 Count | 0 Count | 3.79 VDC | 0 VDC |
| 1789959067 | 115 Count | 831 Count | 0 Count | 3.79 VDC | 0 VDC |
| 1789958766 | 114 Count | 819 Count | 0 Count | 3.79 VDC | 0 VDC |
| 1789958465 | 113 Count | 812 Count | 0 Count | 3.79 VDC | 0 VDC |
| 1789958164 | 112 Count | 803 Count | 0 Count | 3.79 VDC | 0 VDC |
| 1789957864 | 111 Count | 795 Count | 0 Count | 3.8 VDC | 0 VDC |
| 1789957260 | 109 Count | 783 Count | 0 Count | 3.8 VDC | 0 VDC |
| 1789956960 | 108 Count | 774 Count | 0 Count | 3.8 VDC | 0 VDC |
| 1789956659 | 107 Count | 769 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1789956358 | 106 Count | 764 Count | 0 Count | 3.8 VDC | 0 VDC |
| 1789956058 | 105 Count | 757 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1789955757 | 104 Count | 750 Count | 0 Count | 3.8 VDC | 0 VDC |
| 1789955456 | 103 Count | 749 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1789955156 | 102 Count | 737 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1789954855 | 101 Count | 730 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1789954554 | 100 Count | 724 Count | 0 Count | 3.79 VDC | 0 VDC |
| 1789954254 | 99 Count | 721 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1789953953 | 98 Count | 717 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1789953653 | 97 Count | 713 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1789953352 | 96 Count | 709 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1789953051 | 95 Count | 698 Count | 0 Count | 3.79 VDC | 0 VDC |
| 1789952751 | 94 Count | 687 Count | 0 Count | 3.81 VDC | 0 VDC |
| 1789952450 | 93 Count | 683 Count | 0 Count | 3.8 VDC | 0 VDC |
| 1789952149 | 92 Count | 674 Count | 0 Count | 3.82 VDC | 0 VDC |
| 1789951848 | 91 Count | 670 Count | 0 Count | 3.82 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)