This is the latest recevied telemetry packets stored in our database for station/object SP1APG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769834248 | 189 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769832447 | 188 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769830647 | 187 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769828846 | 186 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769827045 | 185 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769819850 | 181 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769818049 | 180 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769816249 | 179 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769814448 | 178 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769812647 | 177 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769810846 | 176 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769809046 | 175 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769807245 | 174 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769803644 | 172 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769801843 | 171 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769800042 | 170 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769798249 | 169 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769796449 | 168 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769794648 | 167 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769792847 | 166 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769791047 | 165 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769789246 | 164 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769787445 | 163 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769785645 | 162 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769783844 | 161 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)