This is the latest recevied telemetry packets stored in our database for station/object KC1VMZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769778032 | 3.44 VDC | 27.2 C | 13.08 % | 0 | 0 |
| 1769777129 | 3.48 VDC | 26.8 C | 13.3 % | 0 | 0 |
| 1769776226 | 3.52 VDC | 27.3 C | 13.1 % | 0 | 0 |
| 1769775323 | 3.58 VDC | 27 C | 13.31 % | 0 | 0 |
| 1769774420 | 3.6 VDC | 26.6 C | 13.58 % | 0 | 0 |
| 1769773516 | 3.63 VDC | 27.2 C | 13.36 % | 0 | 0 |
| 1769772613 | 3.66 VDC | 27.2 C | 13.39 % | 0 | 0 |
| 1769772349 | 3.66 VDC | 27.2 C | 13.43 % | 0 | 0 |
| 1769771453 | 3.69 VDC | 26.7 C | 13.64 % | 0 | 0 |
| 1769770550 | 3.71 VDC | 27.1 C | 13.52 % | 0 | 0 |
| 1769769647 | 3.72 VDC | 27.2 C | 13.56 % | 0 | 0 |
| 1769768744 | 3.75 VDC | 27.1 C | 13.55 % | 0 | 0 |
| 1769767841 | 3.76 VDC | 26.8 C | 13.75 % | 0 | 0 |
| 1769766938 | 3.77 VDC | 27.3 C | 13.58 % | 0 | 0 |
| 1769766035 | 3.78 VDC | 26.9 C | 13.75 % | 0 | 0 |
| 1769765132 | 3.79 VDC | 27.1 C | 13.68 % | 0 | 0 |
| 1769764229 | 3.81 VDC | 27.3 C | 13.65 % | 0 | 0 |
| 1769763326 | 3.84 VDC | 26.8 C | 13.86 % | 0 | 0 |
| 1769762423 | 3.85 VDC | 27.1 C | 13.73 % | 0 | 0 |
| 1769761521 | 3.86 VDC | 27 C | 13.83 % | 0 | 0 |
| 1769760617 | 3.88 VDC | 27.1 C | 13.98 % | 0 | 0 |
| 1769760339 | 3.89 VDC | 27.2 C | 13.91 % | 0 | 0 |
| 1769759690 | 3.9 VDC | 27.3 C | 13.8 % | 0 | 0 |
| 1769758787 | 3.91 VDC | 27.1 C | 14.02 % | 0 | 0 |
| 1769757884 | 3.93 VDC | 27 C | 14.24 % | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)