This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780183464 | 492 Count | 898 Count | 435 Count | 4.11 VDC | 0 VDC |
| 1780181664 | 481 Count | 877 Count | 425 Count | 4.11 VDC | 0 VDC |
| 1780178063 | 472 Count | 861 Count | 418 Count | 4.11 VDC | 0 VDC |
| 1780176262 | 464 Count | 847 Count | 411 Count | 4.11 VDC | 0 VDC |
| 1780172661 | 454 Count | 830 Count | 403 Count | 4.11 VDC | 0 VDC |
| 1780170860 | 443 Count | 809 Count | 393 Count | 4.11 VDC | 0 VDC |
| 1780169059 | 432 Count | 788 Count | 383 Count | 4.11 VDC | 0 VDC |
| 1780167259 | 420 Count | 765 Count | 372 Count | 4.11 VDC | 0 VDC |
| 1780165458 | 409 Count | 744 Count | 362 Count | 4.11 VDC | 0 VDC |
| 1780140249 | 353 Count | 670 Count | 320 Count | 4.12 VDC | 0 VDC |
| 1780136647 | 329 Count | 626 Count | 298 Count | 4.12 VDC | 0 VDC |
| 1780134847 | 318 Count | 605 Count | 288 Count | 4.12 VDC | 0 VDC |
| 1780133046 | 308 Count | 586 Count | 279 Count | 4.12 VDC | 0 VDC |
| 1780131246 | 296 Count | 565 Count | 268 Count | 4.12 VDC | 0 VDC |
| 1780129445 | 289 Count | 552 Count | 262 Count | 4.12 VDC | 0 VDC |
| 1780127645 | 278 Count | 531 Count | 252 Count | 4.12 VDC | 0 VDC |
| 1780125844 | 271 Count | 511 Count | 246 Count | 4.12 VDC | 0 VDC |
| 1780124043 | 255 Count | 477 Count | 231 Count | 4.12 VDC | 0 VDC |
| 1780122242 | 242 Count | 454 Count | 219 Count | 4.12 VDC | 0 VDC |
| 1780120442 | 211 Count | 415 Count | 189 Count | 4.12 VDC | 0 VDC |
| 1780118641 | 201 Count | 394 Count | 180 Count | 4.12 VDC | 0 VDC |
| 1780116840 | 190 Count | 373 Count | 170 Count | 4.12 VDC | 0 VDC |
| 1780115040 | 181 Count | 356 Count | 162 Count | 4.12 VDC | 0 VDC |
| 1780113240 | 173 Count | 341 Count | 155 Count | 4.12 VDC | 0 VDC |
| 1780111438 | 164 Count | 324 Count | 147 Count | 4.12 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)