This is the latest recevied telemetry packets stored in our database for station/object 9M2JHZ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | HDOP* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769798335 | 4.29 V | 37 Pkts | 0.6 % | 0 | 0 |
| 1769798271 | 4.29 V | 38 Pkts | 0.55 % | 0 | 0 |
| 1769798205 | 4.29 V | 37 Pkts | 0.53 % | 0 | 0 |
| 1769798140 | 4.28 V | 37 Pkts | 0.55 % | 0 | 0 |
| 1769798076 | 4.29 V | 38 Pkts | 0.5 % | 0 | 0 |
| 1769798009 | 4.29 V | 38 Pkts | 0.61 % | 0 | 0 |
| 1769797945 | 4.28 V | 38 Pkts | 0.55 % | 0 | 0 |
| 1769797881 | 4.29 V | 38 Pkts | 0.55 % | 0 | 0 |
| 1769797813 | 4.29 V | 38 Pkts | 0.48 % | 0 | 0 |
| 1769797749 | 4.29 V | 36 Pkts | 0.56 % | 0 | 0 |
| 1769797685 | 4.29 V | 38 Pkts | 0.52 % | 0 | 0 |
| 1769797621 | 4.29 V | 38 Pkts | 0.57 % | 0 | 0 |
| 1769797557 | 4.3 V | 37 Pkts | 0.56 % | 0 | 0 |
| 1769797429 | 4.3 V | 35 Pkts | 0.56 % | 0 | 0 |
| 1769797365 | 4.29 V | 39 Pkts | 0.56 % | 0 | 0 |
| 1769797300 | 4.29 V | 36 Pkts | 0.53 % | 0 | 0 |
| 1769797237 | 4.29 V | 37 Pkts | 0.59 % | 0 | 0 |
| 1769797172 | 4.29 V | 38 Pkts | 0.62 % | 0 | 0 |
| 1769797105 | 4.31 V | 37 Pkts | 0.64 % | 0 | 0 |
| 1769797041 | 4.29 V | 37 Pkts | 0.56 % | 0 | 0 |
| 1769796977 | 4.29 V | 37 Pkts | 0.53 % | 0 | 0 |
| 1769796909 | 4.29 V | 39 Pkts | 0.56 % | 0 | 0 |
| 1769796845 | 4.3 V | 38 Pkts | 0.49 % | 0 | 0 |
| 1769796781 | 4.29 V | 39 Pkts | 0.53 % | 0 | 0 |
| 1769796716 | 4.29 V | 37 Pkts | 0.56 % | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
Satellite: 0, 0.01, 0
HDOP: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)