This is the latest recevied telemetry packets stored in our database for station/object SP7TPC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794351902 | 536 Count | 876 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1794350101 | 535 Count | 872 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794348300 | 531 Count | 868 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794346499 | 530 Count | 864 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794344698 | 526 Count | 860 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794342898 | 525 Count | 856 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794341097 | 521 Count | 852 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794339295 | 520 Count | 848 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794337495 | 518 Count | 836 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794335694 | 515 Count | 834 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794333893 | 513 Count | 832 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794308702 | 484 Count | 768 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794306901 | 482 Count | 768 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1794305100 | 480 Count | 768 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794303299 | 478 Count | 768 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794301498 | 476 Count | 768 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794299698 | 474 Count | 768 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794297897 | 472 Count | 768 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794296096 | 470 Count | 768 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794294295 | 468 Count | 768 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794292494 | 466 Count | 768 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1794290693 | 464 Count | 762 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1794288892 | 462 Count | 759 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1794287100 | 460 Count | 755 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1794285300 | 458 Count | 751 Count | 0 Count | 4.18 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)