This is the latest recevied telemetry packets stored in our database for station/object YB0RWN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Voltage* | Current* |
|---|---|---|---|---|---|
| 1786436715 | 37 °C | 31 %RH | 1006 hPa | 4 V | 373 mA |
| 1786434816 | 38 °C | 28 %RH | 1006 hPa | 4 V | 256 mA |
| 1786432917 | 39 °C | 26 %RH | 1006 hPa | 4 V | 255 mA |
| 1786431018 | 37 °C | 29 %RH | 1007 hPa | 4 V | 255 mA |
| 1786429119 | 37 °C | 29 %RH | 1007 hPa | 4 V | 255 mA |
| 1786427220 | 35 °C | 32 %RH | 1008 hPa | 4 V | 255 mA |
| 1786425321 | 36 °C | 33 %RH | 1008 hPa | 4 V | 255 mA |
| 1786423422 | 36 °C | 32 %RH | 1009 hPa | 4 V | 375 mA |
| 1786421523 | 35 °C | 32 %RH | 1009 hPa | 4 V | 373 mA |
| 1786419624 | 35 °C | 34 %RH | 1010 hPa | 4 V | 254 mA |
| 1786417726 | 34 °C | 36 %RH | 1010 hPa | 4 V | 261 mA |
| 1786415827 | 34 °C | 37 %RH | 1010 hPa | 4 V | 253 mA |
| 1786413928 | 34 °C | 39 %RH | 1011 hPa | 4 V | 252 mA |
| 1786412029 | 33 °C | 40 %RH | 1010 hPa | 4 V | 254 mA |
| 1786410129 | 32 °C | 44 %RH | 1010 hPa | 4 V | 253 mA |
| 1786408231 | 33 °C | 43 %RH | 1010 hPa | 4 V | 253 mA |
| 1786406331 | 33 °C | 42 %RH | 1010 hPa | 4 V | 258 mA |
| 1786404432 | 33 °C | 43 %RH | 1009 hPa | 4 V | 373 mA |
| 1786402534 | 33 °C | 41 %RH | 1009 hPa | 4 V | 258 mA |
| 1786400634 | 33 °C | 42 %RH | 1009 hPa | 4 V | 253 mA |
| 1786398736 | 33 °C | 42 %RH | 1009 hPa | 4 V | 255 mA |
| 1786396836 | 33 °C | 41 %RH | 1009 hPa | 4 V | 252 mA |
| 1786396822 | 33 °C | 42 %RH | 1009 hPa | 4 V | 252 mA |
| 1786396801 | 33 °C | 42 %RH | 1009 hPa | 4 V | 252 mA |
| 1786394902 | 33 °C | 42 %RH | 1009 hPa | 4 V | 253 mA |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Voltage: 0, 1, 0
Current: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)