This is the latest recevied telemetry packets stored in our database for station/object IR5AO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794328424 | 11.38 VDC | 0 | 0 | 0 | 0 |
| 1794326623 | 11.5 VDC | 0 | 0 | 0 | 0 |
| 1794324823 | 11.56 VDC | 0 | 0 | 0 | 0 |
| 1794323023 | 11.74 VDC | 0 | 0 | 0 | 0 |
| 1794321223 | 12.3 VDC | 0 | 0 | 0 | 0 |
| 1794319423 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1794317623 | 12.52 VDC | 0 | 0 | 0 | 0 |
| 1794315822 | 11.7 VDC | 0 | 0 | 0 | 0 |
| 1794314021 | 11.46 VDC | 0 | 0 | 0 | 0 |
| 1794312225 | 11.4 VDC | 0 | 0 | 0 | 0 |
| 1794310425 | 11.54 VDC | 0 | 0 | 0 | 0 |
| 1794308625 | 11.66 VDC | 0 | 0 | 0 | 0 |
| 1794306825 | 12 VDC | 0 | 0 | 0 | 0 |
| 1794305025 | 11.74 VDC | 0 | 0 | 0 | 0 |
| 1794303224 | 11.64 VDC | 0 | 0 | 0 | 0 |
| 1794301424 | 11.62 VDC | 0 | 0 | 0 | 0 |
| 1794299624 | 11.54 VDC | 0 | 0 | 0 | 0 |
| 1794297824 | 11.52 VDC | 0 | 0 | 0 | 0 |
| 1794296024 | 11.62 VDC | 0 | 0 | 0 | 0 |
| 1794294224 | 11.5 VDC | 0 | 0 | 0 | 0 |
| 1794292423 | 11.62 VDC | 0 | 0 | 0 | 0 |
| 1794290623 | 11.6 VDC | 0 | 0 | 0 | 0 |
| 1794288823 | 11.58 VDC | 0 | 0 | 0 | 0 |
| 1794287023 | 11.64 VDC | 0 | 0 | 0 | 0 |
| 1794285223 | 11.66 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)