This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769802628 | 521 Count | 817 Count | 455 Count | 3.94 VDC | 0 VDC |
| 1769800830 | 513 Count | 803 Count | 448 Count | 3.94 VDC | 0 VDC |
| 1769799032 | 506 Count | 791 Count | 442 Count | 3.94 VDC | 0 VDC |
| 1769797235 | 499 Count | 778 Count | 436 Count | 3.95 VDC | 0 VDC |
| 1769795438 | 492 Count | 767 Count | 430 Count | 3.95 VDC | 0 VDC |
| 1769793640 | 485 Count | 746 Count | 424 Count | 3.96 VDC | 0 VDC |
| 1769791843 | 477 Count | 725 Count | 417 Count | 3.96 VDC | 0 VDC |
| 1769790045 | 470 Count | 713 Count | 411 Count | 3.96 VDC | 0 VDC |
| 1769788248 | 463 Count | 696 Count | 405 Count | 3.96 VDC | 0 VDC |
| 1769786450 | 456 Count | 682 Count | 399 Count | 3.96 VDC | 1.88 VDC |
| 1769784653 | 449 Count | 670 Count | 393 Count | 3.97 VDC | 4.3 VDC |
| 1769782855 | 443 Count | 661 Count | 388 Count | 3.97 VDC | 4.3 VDC |
| 1769781060 | 437 Count | 655 Count | 383 Count | 3.97 VDC | 4.3 VDC |
| 1769779262 | 431 Count | 649 Count | 378 Count | 3.97 VDC | 4.3 VDC |
| 1769777467 | 425 Count | 642 Count | 373 Count | 3.98 VDC | 4.28 VDC |
| 1769775669 | 417 Count | 627 Count | 366 Count | 3.97 VDC | 4.28 VDC |
| 1769773871 | 410 Count | 614 Count | 360 Count | 3.97 VDC | 4.26 VDC |
| 1769772075 | 403 Count | 603 Count | 354 Count | 3.96 VDC | 4.26 VDC |
| 1769770278 | 397 Count | 591 Count | 349 Count | 3.96 VDC | 4.26 VDC |
| 1769768482 | 390 Count | 580 Count | 343 Count | 3.96 VDC | 4.26 VDC |
| 1769766684 | 382 Count | 565 Count | 336 Count | 3.95 VDC | 4.24 VDC |
| 1769764888 | 375 Count | 552 Count | 330 Count | 3.94 VDC | 4.24 VDC |
| 1769763091 | 368 Count | 539 Count | 324 Count | 3.94 VDC | 4.24 VDC |
| 1769761296 | 362 Count | 532 Count | 319 Count | 3.93 VDC | 4.26 VDC |
| 1769759498 | 357 Count | 527 Count | 315 Count | 3.92 VDC | 4.24 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)