This is the latest recevied telemetry packets stored in our database for station/object ON4SAR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782861207 | 114 Count | 62 Count | 12 Count | 0 VDC | 0 VDC |
| 1782854005 | 113 Count | 55 Count | 12 Count | 0 VDC | 0 VDC |
| 1782846801 | 111 Count | 39 Count | 11 Count | 0 VDC | 0 VDC |
| 1782846770 | 110 Count | 39 Count | 11 Count | 0 VDC | 0 VDC |
| 1782846670 | 109 Count | 37 Count | 11 Count | 0 VDC | 0 VDC |
| 1782846567 | 108 Count | 36 Count | 11 Count | 0 VDC | 0 VDC |
| 1782844653 | 107 Count | 30 Count | 11 Count | 0 VDC | 0 VDC |
| 1782844564 | 105 Count | 28 Count | 11 Count | 0 VDC | 0 VDC |
| 1782843945 | 103 Count | 27 Count | 10 Count | 4.16 VDC | 0.12 VDC |
| 1782843824 | 102 Count | 26 Count | 10 Count | 4.17 VDC | 0.12 VDC |
| 1782843773 | 101 Count | 25 Count | 10 Count | 4.19 VDC | 0.12 VDC |
| 1782842759 | 96 Count | 17 Count | 9 Count | 4.17 VDC | 0.12 VDC |
| 1782840766 | 85 Count | 3 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1782840612 | 84 Count | 2 Count | 0 Count | 4.18 VDC | 0.12 VDC |
| 1782840593 | 83 Count | 0 Count | 0 Count | 4.17 VDC | 0.12 VDC |
| 1782840520 | 82 Count | 0 Count | 0 Count | 4.2 VDC | 0.12 VDC |
| 1782840400 | 81 Count | 0 Count | 0 Count | 4.16 VDC | 0.12 VDC |
| 1782835005 | 80 Count | 0 Count | 0 Count | 4.18 VDC | 0.12 VDC |
| 1782834454 | 78 Count | 0 Count | 0 Count | 4.18 VDC | 0.12 VDC |
| 1782833254 | 77 Count | 0 Count | 0 Count | 4.17 VDC | 0.12 VDC |
| 1782829004 | 74 Count | 0 Count | 0 Count | 4.2 VDC | 0.12 VDC |
| 1782825403 | 73 Count | 0 Count | 0 Count | 4.17 VDC | 0.12 VDC |
| 1782824676 | 72 Count | 0 Count | 0 Count | 4.19 VDC | 0.12 VDC |
| 1782823770 | 71 Count | 0 Count | 0 Count | 4.22 VDC | 0.12 VDC |
| 1782817724 | 69 Count | 0 Count | 0 Count | 4.17 VDC | 0.58 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)