This is the latest recevied telemetry packets stored in our database for station/object TULLUGNG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786419010 | 1408 | 0 | 0 | 0 | 0 |
| 1786418410 | 1410 | 0 | 0 | 0 | 0 |
| 1786417812 | 1412 | 0 | 0 | 0 | 0 |
| 1786417212 | 1414 | 0 | 0 | 0 | 0 |
| 1786416608 | 1416 | 0 | 0 | 0 | 0 |
| 1786416011 | 1418 | 0 | 0 | 0 | 0 |
| 1786415412 | 1418 | 0 | 0 | 0 | 0 |
| 1786414812 | 1418 | 0 | 0 | 0 | 0 |
| 1786414212 | 1418 | 0 | 0 | 0 | 0 |
| 1786413607 | 1417 | 0 | 0 | 0 | 0 |
| 1786413013 | 1416 | 0 | 0 | 0 | 0 |
| 1786412410 | 1416 | 0 | 0 | 0 | 0 |
| 1786411810 | 1417 | 0 | 0 | 0 | 0 |
| 1786411210 | 1419 | 0 | 0 | 0 | 0 |
| 1786410611 | 1420 | 0 | 0 | 0 | 0 |
| 1786410011 | 1421 | 0 | 0 | 0 | 0 |
| 1786409411 | 1423 | 0 | 0 | 0 | 0 |
| 1786408815 | 1423 | 0 | 0 | 0 | 0 |
| 1786408212 | 1424 | 0 | 0 | 0 | 0 |
| 1786407612 | 1422 | 0 | 0 | 0 | 0 |
| 1786407012 | 1422 | 0 | 0 | 0 | 0 |
| 1786406410 | 1421 | 0 | 0 | 0 | 0 |
| 1786405809 | 1424 | 0 | 0 | 0 | 0 |
| 1786405207 | 1426 | 0 | 0 | 0 | 0 |
| 1786404613 | 1429 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)