This is the latest recevied telemetry packets stored in our database for station/object IW2HTZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792754897 | 73 Count | 701 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792753993 | 72 Count | 696 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792751276 | 69 Count | 658 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792748560 | 66 Count | 628 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792747656 | 65 Count | 624 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792744944 | 62 Count | 604 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792742232 | 59 Count | 590 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792739614 | 56 Count | 563 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792737806 | 54 Count | 542 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792735095 | 51 Count | 508 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792734191 | 50 Count | 497 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792729671 | 45 Count | 449 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792727867 | 43 Count | 428 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792726960 | 42 Count | 418 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792726060 | 41 Count | 410 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792724252 | 39 Count | 388 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792721540 | 36 Count | 355 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792720632 | 35 Count | 345 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792719826 | 34 Count | 333 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792718918 | 33 Count | 323 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792717110 | 31 Count | 301 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792716207 | 30 Count | 292 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792715307 | 29 Count | 277 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792714399 | 28 Count | 266 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1792712595 | 26 Count | 249 Count | 0 Count | 0.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)