This is the latest recevied telemetry packets stored in our database for station/object YC2YIZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790324261 | 0 Count | 31 Count | 0 Count | 0 VDC | 0 VDC |
| 1790322461 | 0 Count | 1014 Count | 0 Count | 0 VDC | 0 VDC |
| 1790320661 | 0 Count | 985 Count | 0 Count | 0 VDC | 0 VDC |
| 1790318860 | 0 Count | 958 Count | 0 Count | 0 VDC | 0 VDC |
| 1790317060 | 0 Count | 928 Count | 0 Count | 0 VDC | 0 VDC |
| 1790315260 | 0 Count | 899 Count | 0 Count | 0 VDC | 0 VDC |
| 1790313460 | 0 Count | 872 Count | 0 Count | 0 VDC | 0 VDC |
| 1790311660 | 0 Count | 843 Count | 0 Count | 0 VDC | 0 VDC |
| 1790309860 | 0 Count | 815 Count | 0 Count | 0 VDC | 0 VDC |
| 1790308059 | 0 Count | 785 Count | 0 Count | 0 VDC | 0 VDC |
| 1790306259 | 0 Count | 754 Count | 0 Count | 0 VDC | 0 VDC |
| 1790304459 | 0 Count | 726 Count | 0 Count | 0 VDC | 0 VDC |
| 1790302659 | 0 Count | 695 Count | 0 Count | 0 VDC | 0 VDC |
| 1790300859 | 0 Count | 665 Count | 0 Count | 0 VDC | 0 VDC |
| 1790299059 | 0 Count | 638 Count | 0 Count | 0 VDC | 0 VDC |
| 1790297259 | 0 Count | 615 Count | 0 Count | 0 VDC | 0 VDC |
| 1790295459 | 0 Count | 591 Count | 0 Count | 0 VDC | 0 VDC |
| 1790293659 | 0 Count | 561 Count | 0 Count | 0 VDC | 0 VDC |
| 1790291859 | 0 Count | 531 Count | 0 Count | 0 VDC | 0 VDC |
| 1790290059 | 0 Count | 502 Count | 0 Count | 0 VDC | 0 VDC |
| 1790288258 | 0 Count | 473 Count | 0 Count | 0 VDC | 0 VDC |
| 1790286459 | 0 Count | 452 Count | 0 Count | 0 VDC | 0 VDC |
| 1790284659 | 0 Count | 430 Count | 0 Count | 0 VDC | 0 VDC |
| 1790282859 | 0 Count | 409 Count | 0 Count | 0 VDC | 0 VDC |
| 1790281059 | 0 Count | 386 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)