This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769784616 | 337 Count | 265 Count | 263 Count | 4.27 VDC | 0 VDC |
| 1769782815 | 333 Count | 262 Count | 260 Count | 4.31 VDC | 0 VDC |
| 1769781014 | 330 Count | 260 Count | 258 Count | 4.34 VDC | 0 VDC |
| 1769779213 | 327 Count | 258 Count | 256 Count | 4.29 VDC | 0 VDC |
| 1769777413 | 321 Count | 253 Count | 251 Count | 4.35 VDC | 0 VDC |
| 1769775619 | 317 Count | 250 Count | 248 Count | 4.37 VDC | 0 VDC |
| 1769773819 | 313 Count | 247 Count | 245 Count | 4.29 VDC | 0 VDC |
| 1769772018 | 310 Count | 245 Count | 243 Count | 4.32 VDC | 0 VDC |
| 1769770217 | 303 Count | 239 Count | 237 Count | 4.33 VDC | 0 VDC |
| 1769768417 | 298 Count | 235 Count | 233 Count | 4.34 VDC | 0 VDC |
| 1769766616 | 295 Count | 233 Count | 231 Count | 4.28 VDC | 0 VDC |
| 1769764815 | 292 Count | 231 Count | 229 Count | 4.32 VDC | 0 VDC |
| 1769763015 | 289 Count | 229 Count | 227 Count | 4.32 VDC | 0 VDC |
| 1769761214 | 286 Count | 227 Count | 225 Count | 4.27 VDC | 0 VDC |
| 1769759413 | 282 Count | 224 Count | 222 Count | 4.27 VDC | 0 VDC |
| 1769757613 | 278 Count | 221 Count | 219 Count | 4.32 VDC | 0 VDC |
| 1769755812 | 271 Count | 215 Count | 213 Count | 4.34 VDC | 0 VDC |
| 1769754019 | 265 Count | 210 Count | 208 Count | 4.34 VDC | 0 VDC |
| 1769752219 | 256 Count | 202 Count | 200 Count | 4.35 VDC | 0 VDC |
| 1769750418 | 250 Count | 197 Count | 195 Count | 4.3 VDC | 0 VDC |
| 1769748617 | 243 Count | 191 Count | 189 Count | 4.27 VDC | 0 VDC |
| 1769746817 | 237 Count | 186 Count | 184 Count | 4.3 VDC | 0 VDC |
| 1769745016 | 223 Count | 173 Count | 171 Count | 4.28 VDC | 0 VDC |
| 1769743215 | 209 Count | 160 Count | 158 Count | 4.29 VDC | 0 VDC |
| 1769741414 | 203 Count | 155 Count | 153 Count | 4.33 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)