This is the latest recevied telemetry packets stored in our database for station/object EA5SW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786403765 | 0 Count | 575 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1786402265 | 0 Count | 534 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1786400765 | 0 Count | 495 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1786399265 | 0 Count | 451 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1786397765 | 0 Count | 399 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1786396265 | 0 Count | 353 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1786395665 | 0 Count | 325 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1786394165 | 0 Count | 280 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1786392665 | 0 Count | 230 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1786391165 | 0 Count | 180 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1786389665 | 0 Count | 147 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1786388165 | 0 Count | 99 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1786386665 | 0 Count | 66 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1786385165 | 0 Count | 29 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1786383665 | 0 Count | 1010 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1786382165 | 0 Count | 975 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1786380665 | 0 Count | 937 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1786379164 | 0 Count | 895 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1786377664 | 0 Count | 852 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1786376164 | 0 Count | 815 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1786374664 | 0 Count | 783 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1786374064 | 0 Count | 773 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1786372564 | 0 Count | 736 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1786371064 | 0 Count | 712 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1786369564 | 0 Count | 686 Count | 0 Count | 4.3 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)