This is the latest recevied telemetry packets stored in our database for station/object CE1RLP-30. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786418088 | 4.47 VDC | 12.58 VDC | 0 | 0 | 0 |
| 1786417188 | 4.5 VDC | 12.82 VDC | 0 | 0 | 0 |
| 1786416287 | 4.48 VDC | 12.74 VDC | 0 | 0 | 0 |
| 1786415387 | 4.53 VDC | 12.6 VDC | 0 | 0 | 0 |
| 1786414486 | 4.54 VDC | 12.74 VDC | 0 | 0 | 0 |
| 1786413585 | 4.57 VDC | 12.6 VDC | 0 | 0 | 0 |
| 1786412685 | 4.55 VDC | 12.76 VDC | 0 | 0 | 0 |
| 1786411784 | 4.47 VDC | 12.8 VDC | 0 | 0 | 0 |
| 1786410883 | 4.53 VDC | 12.78 VDC | 0 | 0 | 0 |
| 1786409983 | 4.53 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1786409082 | 4.55 VDC | 12.76 VDC | 0 | 0 | 0 |
| 1786408181 | 4.48 VDC | 12.66 VDC | 0 | 0 | 0 |
| 1786407281 | 4.52 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1786406380 | 4.48 VDC | 12.88 VDC | 0 | 0 | 0 |
| 1786405479 | 4.53 VDC | 12.74 VDC | 0 | 0 | 0 |
| 1786404579 | 4.56 VDC | 12.78 VDC | 0 | 0 | 0 |
| 1786401892 | 4.51 VDC | 12.88 VDC | 0 | 0 | 0 |
| 1786400991 | 4.56 VDC | 12.88 VDC | 0 | 0 | 0 |
| 1786400090 | 4.48 VDC | 12.86 VDC | 0 | 0 | 0 |
| 1786399190 | 4.56 VDC | 12.7 VDC | 0 | 0 | 0 |
| 1786398289 | 4.49 VDC | 12.9 VDC | 0 | 0 | 0 |
| 1786397388 | 4.53 VDC | 12.92 VDC | 0 | 0 | 0 |
| 1786396488 | 4.52 VDC | 12.96 VDC | 0 | 0 | 0 |
| 1786395587 | 4.56 VDC | 12.88 VDC | 0 | 0 | 0 |
| 1786394687 | 4.49 VDC | 13 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)