This is the latest recevied telemetry packets stored in our database for station/object LU6MHO-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786414921 | 785 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786414017 | 784 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786413114 | 783 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786412211 | 782 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786411307 | 781 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786410404 | 780 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786409501 | 779 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786408597 | 778 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786407694 | 777 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786406790 | 776 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786405887 | 775 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786404984 | 774 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786404080 | 773 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786403177 | 772 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786402274 | 771 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786401370 | 770 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786400467 | 769 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786399563 | 768 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786398660 | 767 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786397757 | 766 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786396853 | 765 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786395950 | 764 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786395046 | 763 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786394143 | 762 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786393319 | 761 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)