This is the latest recevied telemetry packets stored in our database for station/object DO1FE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780215404 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780213963 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780212523 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780211082 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780209648 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780208208 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780206767 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780205327 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780203887 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780202447 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780201007 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780199566 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780198126 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780196686 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780195246 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780193806 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780192365 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780190925 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780189485 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780188045 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780186605 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780185164 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780183724 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780182284 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1780180844 | 4.17 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)