This is the latest recevied telemetry packets stored in our database for station/object SR9BBC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790303379 | 22 Count | 379 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1790302478 | 21 Count | 317 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1790301578 | 17 Count | 268 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1790300677 | 16 Count | 209 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1790299776 | 12 Count | 162 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1790298875 | 10 Count | 105 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1790297974 | 6 Count | 51 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1790297073 | 68 Count | 1042 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1790296172 | 64 Count | 990 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1790295271 | 63 Count | 940 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1790294371 | 58 Count | 890 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1790293470 | 57 Count | 844 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1790292568 | 53 Count | 794 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1790291668 | 52 Count | 745 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1790290767 | 48 Count | 692 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1790289866 | 47 Count | 632 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1790288965 | 43 Count | 575 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1790288064 | 42 Count | 525 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1790287163 | 37 Count | 477 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1790286263 | 36 Count | 425 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1790285362 | 32 Count | 368 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1790284461 | 30 Count | 319 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1790283560 | 24 Count | 265 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1790282659 | 20 Count | 218 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1790281758 | 12 Count | 158 Count | 0 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)