This is the latest recevied telemetry packets stored in our database for station/object SP3ZBY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764960776 | 218 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764958975 | 217 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764957174 | 216 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764955373 | 215 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764953572 | 214 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764951771 | 213 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764949981 | 212 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764948180 | 211 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764946379 | 210 Count | 99 Count | 93 Count | 4 VDC | 0 VDC |
| 1764944578 | 207 Count | 97 Count | 91 Count | 4 VDC | 0 VDC |
| 1764942777 | 206 Count | 97 Count | 91 Count | 4 VDC | 0 VDC |
| 1764940976 | 205 Count | 97 Count | 91 Count | 4 VDC | 0 VDC |
| 1764939175 | 204 Count | 97 Count | 91 Count | 4 VDC | 0 VDC |
| 1764937374 | 203 Count | 97 Count | 91 Count | 4 VDC | 0 VDC |
| 1764935573 | 202 Count | 96 Count | 91 Count | 3.99 VDC | 0 VDC |
| 1764933773 | 201 Count | 96 Count | 91 Count | 3.99 VDC | 0 VDC |
| 1764931972 | 200 Count | 96 Count | 91 Count | 4 VDC | 0 VDC |
| 1764930171 | 199 Count | 95 Count | 91 Count | 4 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)