This is the latest recevied telemetry packets stored in our database for station/object 9W2KYN-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769769124 | 4.44 VDC | 0 | 0 | 0 | 0 |
| 1769769066 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1769769033 | 5.29 VDC | 0 | 0 | 0 | 0 |
| 1769768992 | 5.02 VDC | 0 | 0 | 0 | 0 |
| 1769768827 | 4.79 VDC | 0 | 0 | 0 | 0 |
| 1769768766 | 5.01 VDC | 0 | 0 | 0 | 0 |
| 1769768031 | 5.04 VDC | 0 | 0 | 0 | 0 |
| 1769767945 | 5.15 VDC | 0 | 0 | 0 | 0 |
| 1769766933 | 4.88 VDC | 0 | 0 | 0 | 0 |
| 1769766594 | 4.32 VDC | 0 | 0 | 0 | 0 |
| 1769766550 | 5.21 VDC | 0 | 0 | 0 | 0 |
| 1769766422 | 4.54 VDC | 0 | 0 | 0 | 0 |
| 1769766348 | 4.98 VDC | 0 | 0 | 0 | 0 |
| 1769766294 | 5.08 VDC | 0 | 0 | 0 | 0 |
| 1769766219 | 5.27 VDC | 0 | 0 | 0 | 0 |
| 1769766159 | 4.73 VDC | 0 | 0 | 0 | 0 |
| 1769766107 | 5.01 VDC | 0 | 0 | 0 | 0 |
| 1769766051 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1769765983 | 4.37 VDC | 0 | 0 | 0 | 0 |
| 1769765950 | 4.33 VDC | 0 | 0 | 0 | 0 |
| 1769765867 | 4.61 VDC | 0 | 0 | 0 | 0 |
| 1769765759 | 4.38 VDC | 0 | 0 | 0 | 0 |
| 1769765672 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1769765618 | 4.8 VDC | 0 | 0 | 0 | 0 |
| 1769765544 | 5.31 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)