This is the latest recevied telemetry packets stored in our database for station/object KK7LLM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769818454 | 470 Volts | 596 Deg.F | 340 | 0 | 0 |
| 1769818421 | 466 Volts | 596 Deg.F | 345 | 0 | 0 |
| 1769818368 | 469 Volts | 595 Deg.F | 350 | 0 | 0 |
| 1769818327 | 468 Volts | 595 Deg.F | 348 | 0 | 0 |
| 1769818320 | 464 Volts | 595 Deg.F | 593 | 0 | 0 |
| 1769818192 | 470 Volts | 595 Deg.F | 343 | 0 | 0 |
| 1769818124 | 475 Volts | 595 Deg.F | 334 | 0 | 0 |
| 1769818037 | 477 Volts | 592 Deg.F | 334 | 0 | 0 |
| 1769817989 | 470 Volts | 592 Deg.F | 348 | 0 | 0 |
| 1769817905 | 474 Volts | 591 Deg.F | 343 | 0 | 0 |
| 1769817783 | 473 Volts | 588 Deg.F | 338 | 0 | 0 |
| 1769817672 | 475 Volts | 582 Deg.F | 336 | 0 | 0 |
| 1769817662 | 469 Volts | 581 Deg.F | 346 | 0 | 0 |
| 1769817637 | 475 Volts | 580 Deg.F | 352 | 0 | 0 |
| 1769817607 | 469 Volts | 579 Deg.F | 607 | 0 | 0 |
| 1769817512 | 473 Volts | 577 Deg.F | 363 | 0 | 0 |
| 1769794666 | 467 Volts | 601 Deg.F | 338 | 0 | 0 |
| 1769794284 | 457 Volts | 602 Deg.F | 530 | 0 | 0 |
| 1769794166 | 475 Volts | 601 Deg.F | 337 | 0 | 0 |
| 1769794065 | 477 Volts | 601 Deg.F | 332 | 0 | 0 |
| 1769793944 | 476 Volts | 600 Deg.F | 336 | 0 | 0 |
| 1769793893 | 477 Volts | 599 Deg.F | 335 | 0 | 0 |
| 1769793887 | 476 Volts | 599 Deg.F | 344 | 0 | 0 |
| 1769793801 | 472 Volts | 599 Deg.F | 346 | 0 | 0 |
| 1769793656 | 467 Volts | 597 Deg.F | 345 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)