This is the latest recevied telemetry packets stored in our database for station/object DL3CK-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | GAS* | Value5* |
|---|---|---|---|---|---|
| 1764962814 | 19.7 C | 50.4 % | 1016.5 hPa | 18.58 % | 0 |
| 1764962520 | 18.5 C | 52.99 % | 1017.63 hPa | 18.88 % | 0 |
| 1764962227 | 16.9 C | 55.48 % | 1016.38 hPa | 18.9 % | 0 |
| 1764960161 | 15.9 C | 57.2 % | 1017.13 hPa | 20.26 % | 0 |
| 1764959553 | 13.5 C | 57.94 % | 972.88 hPa | 24.04 % | 0 |
| 1764957765 | 12.2 C | 58.25 % | 1017.88 hPa | 21.97 % | 0 |
| 1764957538 | 10.7 C | 56.49 % | 973.88 hPa | 19.17 % | 0 |
| 1764953222 | 14.1 C | 60.26 % | 1016.25 hPa | 20.28 % | 0 |
| 1764952986 | 12.8 C | 61.64 % | 1016.75 hPa | 20.59 % | 0 |
| 1764952702 | 10.8 C | 62.82 % | 1017.38 hPa | 19.73 % | 0 |
| 1764952471 | 9.3 C | 62.01 % | 972.13 hPa | 16.78 % | 0 |
| 1764913999 | 8.7 C | 62.28 % | 1013 hPa | 20.01 % | 0 |
| 1764913744 | 8.3 C | 59.87 % | 968.25 hPa | 16.38 % | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
GAS: 0, 0.01, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)