This is the latest recevied telemetry packets stored in our database for station/object BL7JV-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | SATELLITE* | HDOP* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794278915 | 19 | 1 | 0 | 0 | 0 |
| 1794278909 | 24 | 0.8 | 0 | 0 | 0 |
| 1794278903 | 25 | 0.7 | 0 | 0 | 0 |
| 1794278896 | 25 | 0.7 | 0 | 0 | 0 |
| 1794278889 | 24 | 0.8 | 0 | 0 | 0 |
| 1794278868 | 24 | 0.8 | 0 | 0 | 0 |
| 1794278565 | 25 | 0.7 | 0 | 0 | 0 |
| 1794278544 | 25 | 0.7 | 0 | 0 | 0 |
| 1794278538 | 25 | 0.7 | 0 | 0 | 0 |
| 1794278517 | 24 | 0.7 | 0 | 0 | 0 |
| 1794278510 | 25 | 0.7 | 0 | 0 | 0 |
| 1794278504 | 25 | 0.7 | 0 | 0 | 0 |
| 1794278498 | 23 | 0.8 | 0 | 0 | 0 |
| 1794278478 | 23 | 0.8 | 0 | 0 | 0 |
| 1794278457 | 23 | 0.8 | 0 | 0 | 0 |
| 1794278434 | 23 | 0.8 | 0 | 0 | 0 |
| 1794278420 | 24 | 0.8 | 0 | 0 | 0 |
| 1794278403 | 25 | 0.7 | 0 | 0 | 0 |
| 1794278382 | 24 | 0.7 | 0 | 0 | 0 |
| 1794278360 | 24 | 0.7 | 0 | 0 | 0 |
| 1794278339 | 25 | 0.7 | 0 | 0 | 0 |
| 1794278333 | 24 | 0.7 | 0 | 0 | 0 |
| 1794278312 | 24 | 0.7 | 0 | 0 | 0 |
| 1794278294 | 25 | 0.7 | 0 | 0 | 0 |
| 1794278244 | 23 | 0.7 | 0 | 0 | 0 |
*Used Equation Coefficients:
SATELLITE: 0, 1, 0
HDOP: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)