This is the latest recevied telemetry packets stored in our database for station/object W8BI-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780153954 | 394 | 263 | 11 | 1 | 1 |
| 1780153831 | 408 | 261 | 10 | 1 | 1 |
| 1780153711 | 330 | 271 | 10 | 1 | 1 |
| 1780153207 | 354 | 258 | 6 | 6 | 1 |
| 1780153060 | 350 | 264 | 11 | 1 | 1 |
| 1780152907 | 368 | 265 | 10 | 1 | 1 |
| 1780152763 | 332 | 262 | 14 | 1 | 1 |
| 1780152559 | 374 | 259 | 9 | 1 | 1 |
| 1780152409 | 408 | 258 | 10 | 1 | 1 |
| 1780152274 | 442 | 259 | 10 | 1 | 1 |
| 1780152154 | 430 | 258 | 10 | 1 | 1 |
| 1780152034 | 444 | 251 | 10 | 1 | 1 |
| 1780151914 | 440 | 266 | 10 | 1 | 1 |
| 1780151791 | 428 | 263 | 10 | 1 | 1 |
| 1780151662 | 426 | 260 | 10 | 1 | 1 |
| 1780151536 | 420 | 262 | 9 | 6 | 1 |
| 1780151404 | 436 | 254 | 9 | 1 | 1 |
| 1780151281 | 450 | 261 | 9 | 1 | 1 |
| 1780151161 | 422 | 259 | 8 | 1 | 1 |
| 1780151026 | 406 | 260 | 9 | 1 | 1 |
| 1780150879 | 396 | 269 | 8 | 1 | 1 |
| 1780150735 | 420 | 259 | 8 | 1 | 1 |
| 1780150606 | 402 | 266 | 16 | 1 | 1 |
| 1780150371 | 410 | 269 | 0 | 0 | 1 |
| 1780150132 | 404 | 267 | 13 | 1 | 1 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)