This is the latest recevied telemetry packets stored in our database for station/object DG1KWA-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765734788 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765732881 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765732655 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765732622 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765732578 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765732500 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765732477 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765732442 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765732355 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765732226 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765731181 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765730995 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765730858 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765730733 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765730706 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765730586 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765730314 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765730191 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765729814 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765729037 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765728947 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765728789 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765721691 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765721428 | 0.21 VDC | 0 | 0 | 0 | 0 |
| 1765721295 | 0.21 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)