This is the latest recevied telemetry packets stored in our database for station/object EA5JKT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769837743 | 32 Count | 273 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1769835939 | 31 Count | 273 Count | 0 Count | 4.16 VDC | 0 VDC |
| 1769834136 | 30 Count | 271 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1769832332 | 29 Count | 259 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1769830528 | 28 Count | 243 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1769828768 | 27 Count | 240 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1769826964 | 26 Count | 236 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1769825161 | 25 Count | 226 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1769823357 | 24 Count | 208 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1769821554 | 23 Count | 193 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1769819750 | 22 Count | 183 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1769817946 | 21 Count | 176 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1769816142 | 20 Count | 169 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1769814339 | 19 Count | 162 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1769812535 | 18 Count | 156 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1769810732 | 17 Count | 156 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1769808927 | 16 Count | 156 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1769807168 | 15 Count | 155 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1769805364 | 14 Count | 155 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1769803560 | 13 Count | 155 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1769801756 | 12 Count | 155 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1769799952 | 11 Count | 155 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1769798149 | 10 Count | 155 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1769796345 | 9 Count | 155 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1769794541 | 8 Count | 153 Count | 0 Count | 4.21 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)