This is the latest recevied telemetry packets stored in our database for station/object EA1FBU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765006973 | 4.41 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1765006073 | 4.4 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1765005173 | 4.4 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1765004273 | 4.4 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1765003373 | 4.4 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1765002473 | 4.4 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1765001572 | 4.41 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1765000672 | 4.41 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764999772 | 4.42 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764998872 | 4.42 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764997972 | 4.42 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1764997072 | 4.42 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764996172 | 4.43 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764995272 | 4.42 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1764994371 | 4.46 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1764993471 | 4.44 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764992571 | 4.42 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764991671 | 4.39 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764990771 | 4.39 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764989871 | 4.41 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1764988971 | 4.42 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764988071 | 4.41 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1764987171 | 4.39 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764986270 | 4.38 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1764985370 | 4.33 VDC | 0.66 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)