This is the latest recevied telemetry packets stored in our database for station/object SP9PSP-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786417476 | 560 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786416876 | 559 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786416276 | 558 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786415676 | 557 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786415076 | 556 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786414476 | 555 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786413875 | 554 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786413275 | 553 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786412675 | 552 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786412075 | 551 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786411475 | 550 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786410875 | 549 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786410275 | 548 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786409674 | 547 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786409074 | 546 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786408479 | 545 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786407878 | 544 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786407278 | 543 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786406678 | 542 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786406078 | 541 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786405478 | 540 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786404878 | 539 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786404278 | 538 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786403677 | 537 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1786403077 | 536 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)