This is the latest recevied telemetry packets stored in our database for station/object VE6SKI-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735214519 | 383 | 563 | 0 | 0 | 0 |
| 1735212727 | 382 | 563 | 0 | 0 | 0 |
| 1735210936 | 383 | 564 | 0 | 0 | 0 |
| 1735207352 | 383 | 566 | 0 | 0 | 0 |
| 1735201977 | 383 | 567 | 0 | 0 | 0 |
| 1735198395 | 384 | 567 | 0 | 0 | 0 |
| 1735196603 | 384 | 568 | 0 | 0 | 0 |
| 1735193020 | 383 | 568 | 0 | 0 | 0 |
| 1735191228 | 384 | 569 | 0 | 0 | 0 |
| 1735189437 | 384 | 569 | 0 | 0 | 0 |
| 1735182270 | 385 | 571 | 0 | 0 | 0 |
| 1735173311 | 385 | 573 | 0 | 0 | 0 |
| 1735171520 | 385 | 574 | 0 | 0 | 0 |
| 1735169728 | 385 | 575 | 0 | 0 | 0 |
| 1735164353 | 385 | 576 | 0 | 0 | 0 |
| 1735162561 | 385 | 576 | 0 | 0 | 0 |
| 1735160769 | 386 | 575 | 0 | 0 | 0 |
| 1735153603 | 385 | 570 | 0 | 0 | 0 |
| 1735151811 | 386 | 569 | 0 | 0 | 0 |
| 1735150020 | 386 | 569 | 0 | 0 | 0 |
| 1735146437 | 386 | 567 | 0 | 0 | 0 |
| 1735144645 | 387 | 567 | 0 | 0 | 0 |
| 1735142853 | 387 | 568 | 0 | 0 | 0 |
| 1735141062 | 387 | 568 | 0 | 0 | 0 |
| 1735137478 | 387 | 569 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)