This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790308873 | 49 Count | 234 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790308573 | 48 Count | 227 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790308273 | 47 Count | 217 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790307973 | 46 Count | 217 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790307673 | 45 Count | 214 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790307373 | 44 Count | 209 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790307074 | 43 Count | 203 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790306774 | 42 Count | 199 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790306474 | 41 Count | 194 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790306174 | 40 Count | 193 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790305874 | 39 Count | 186 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790305574 | 38 Count | 180 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790305273 | 37 Count | 176 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790304974 | 36 Count | 171 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790304674 | 35 Count | 163 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790304374 | 34 Count | 162 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790304074 | 33 Count | 159 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790303774 | 32 Count | 151 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790303475 | 31 Count | 146 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790303174 | 30 Count | 143 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790302875 | 29 Count | 139 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790302574 | 28 Count | 134 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790302275 | 27 Count | 129 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790301975 | 26 Count | 124 Count | 0 Count | 4.15 VDC | 0 VDC |
| 1790301674 | 25 Count | 124 Count | 0 Count | 4.15 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)