This is the latest recevied telemetry packets stored in our database for station/object CE1RLP-33. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786433865 | 4.1 VDC | 12.62 VDC | 0 | 0 | 0 |
| 1786432965 | 4.1 VDC | 12.64 VDC | 0 | 0 | 0 |
| 1786432065 | 4.1 VDC | 12.66 VDC | 0 | 0 | 0 |
| 1786431165 | 4.1 VDC | 12.66 VDC | 0 | 0 | 0 |
| 1786430265 | 4.1 VDC | 12.66 VDC | 0 | 0 | 0 |
| 1786429365 | 4.1 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1786428465 | 4.1 VDC | 12.7 VDC | 0 | 0 | 0 |
| 1786427565 | 4.1 VDC | 12.64 VDC | 0 | 0 | 0 |
| 1786426664 | 4.1 VDC | 12.72 VDC | 0 | 0 | 0 |
| 1786425765 | 4.1 VDC | 12.7 VDC | 0 | 0 | 0 |
| 1786424864 | 4.1 VDC | 12.72 VDC | 0 | 0 | 0 |
| 1786423964 | 4.1 VDC | 12.74 VDC | 0 | 0 | 0 |
| 1786423064 | 4.11 VDC | 12.74 VDC | 0 | 0 | 0 |
| 1786422164 | 4.11 VDC | 12.76 VDC | 0 | 0 | 0 |
| 1786421264 | 4.11 VDC | 12.76 VDC | 0 | 0 | 0 |
| 1786419449 | 4.09 VDC | 12.78 VDC | 0 | 0 | 0 |
| 1786418566 | 4.09 VDC | 12.8 VDC | 0 | 0 | 0 |
| 1786417666 | 4.09 VDC | 12.8 VDC | 0 | 0 | 0 |
| 1786416766 | 4.1 VDC | 12.8 VDC | 0 | 0 | 0 |
| 1786415865 | 4.09 VDC | 12.8 VDC | 0 | 0 | 0 |
| 1786414966 | 4.1 VDC | 12.82 VDC | 0 | 0 | 0 |
| 1786414066 | 4.09 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1786413166 | 4.1 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1786412265 | 4.1 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1786411365 | 4.1 VDC | 12.86 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)